Adhesive for insulation

One-component adhesive based on synthetic rubber for mounting a rubber pipe and sheet insulation.

Adhesive for technical insulation is one-component adhesive, which is a solution of synthetic caoutchouc with addition of modifier and mixture of organic solvent.

Glue found a great use for the installation of pipe and sheet rubber insulation.

The advantages of glue:

  • Works well at high and low temperatures
  • High adhesion when mounting on different surfaces
  • Has excellent water resistance and resistance to various harmful substances
  • Has high strength

Application of glue:

  • Glue is recommended when the ambient temperature 5.. 250C and the allowable humidity is 60-65%
  • Before you apply the glue you want to mix
  • The surface before applying the glue needed to dry and degrease
  • The adhesive is applied on the bonding surfaces evenly, using a brush
  • After pasting you must wait for the glue dries (about 5-10 minutes)
  • After drying, check to touch the adhesive tack
  • It is very important to tightly close the jar with the glue when not in use

 

THE CALCULATION OF ADHESIVE CONSUMPTION SHEET INSULATION:

A view of the insulated surface

Flow rate, 1l/sq. m.

The rectangular duct, flat surface

10

Pipe with a diameter of more than 114 mm

6

 

CALCULATION OF CONSUMPTION OF ADHESIVES FOR PIPE INSULATION

The thickness of pipe insulation, mm

Flow rate, 1l/RM.m.

6

150

9

120

13

100

20

70

25

50

 

 

Form release glue: banks 1l.

Features:

Non-volatile content : 20-22%
Viscosity at 200 C: 2500 MPa 0 With
Density: approx 0,83 g/cm3
The maximum open time of containers when using -10 min
Application temperature (for coolant): -40.. 1050C
Adhesive strength - after 24 hours, delamination -55-65 N/cm
The time to reach 70% of the maximum strength of the connection-7-10 min.
The resistance of the connection: 900With

Other products