Soundproof mount

Vibration isolation hangers for mounting wall frame wall on a metal frame.

Sound-proof fasteners are used for improving sound insulation at low frequencies due to its low resonant frequency.
Acoustic characteristics and workloads are ideally suited for installation requirements frame structures Knauf.
The main feature of all fixtures is the use of elastomeric material Sylomer and Sylodyn that help to solve the issue of vibration isolation.
The sound-proof fixtures in the system frame structures allows to improve the level of sound insulation is approximately 2 dB.

ULTRACOUSTIC
Universal mountwhich is suitable for both walls and ceilings.
A budget option. The preservation of acoustic properties – at least 30 years.
The noise level reduction by 25% (the index of the added air noise design ΔRw = 2 dB). Compares well with conventional suspension.
Is the suspension of PP perforated bases and two sides of the insertion of the material Sylomer green and gray.
Mounted the bracket to the wall/ceiling through the hole with a metal anchor nails. The mount attaches to the base of the gray layer of elastomer.
Consumption of fasteners per 1 m2: 2,7 PCs.
Maximum load on suspension – 15 kg.
Dimensions: length 350 mm, width 30 mm, thickness 1 mm.

 

Will SOMANET-CONNECT K15
Ceiling mount "premium" class. Used when mounting the ceiling frame type. The preservation of acoustic properties – over 30 years.
Is the suspension of corrosion-resistant metal. As the elastic layer material is used Sylodyn.
Mounted the mount to the ceiling using two holes with metal anchor nails.
The working range of the suspension – 20 dB. High efficiency at low frequencies below 125 Hz.
Consumption of fasteners per 1 m2: 2,7 PCs.
Maximum load on suspension – 15 kg.

 

WILL SOMANET-CONNECT PP
A budget option for acoustical ceiling hangers.
Effectively reduces the transmission of sound vibrations to the plates.
As a working element is an elastomeric polyurethane Sylodyn 12 mm thick. the Preservation of acoustic properties – over 30 years.
Will somanet-connect PP is a straight suspension, which is mounted on the ceiling profile.
Made of galvanized steel. The opposite cylindrical swage line provides the effect of "Grover washer" in the installation.
The working range of the suspension – up to 14 dB.
Index additional sound insulation when applying suspensions will Somanet-connect PP in the design of the ceiling thickness 115 mm: ΔRw=18 dB, 175 mm: ΔRw=20 dB, 225 mm: ΔRw=22 dB.
Consumption of fasteners per 1 m2 and 2.7 PC.

The suspension will SOMANET-CONNECT PP attached via the 2 holes with a metal anchor nails 6 mm.

 

WILL SOMANET-CONNECT, COP
Anti-vibration wall mount premium.
These fixtures are specially designed for wall timber frame wall on a metal frame.
Through the use of elastic Sylodyn elastomer substantially reduces the passage of vibrations through the mount. And this, in turn, improves the quality of sound insulation.
Is the suspension of corrosion-resistant metal

Mounted the mount to the ceiling using two holes with metal anchor nails or plastic plugs with metal screw.
The working range of the suspension – 20 dB. High efficiency at low frequencies below 125 Hz.
Consumption of fasteners: 1 pieces of no more than every 1.5 meter upright profile, i.e. 3 pieces on the length of the profile size 3M. From the edge of the profile mount is mounted at a distance of not more than 15 cm.
Maximum load on suspension – 25 kg.
The thickness of the direct suspension of 0.9 mm.

 

WILL SOMANET-CONNECT PS
Base anti-vibration wall mount.

This is a budget option vibration control of suspensions in the system frame wall wall. As a working anti-vibration element are two types of Sylodyn 12mm and 6mm in combination.
Made of galvanized steel. The opposite cylindrical swage line provides the effect of "Grover washer" in the installation.
The working range of the suspension – up to 14dB.
Consumption of fasteners: 1 pieces of no more than every 1.5 meter upright profile, i.e. 3 pieces on the length of the profile with a size of 3 m From the edge of the profile mount is mounted at a distance of not more than 15 cm.
Maximum load on suspension – 25 kg.
The thickness of the direct suspension of 0.9 mm.
Index additional sound insulation with the use of fasteners will Somanet-connect PS: ΔRw=15 dB.

 

ZVUKOREZHISER SUSPENSION WOLF
Suitable for system installation Ponstar using mullion profile.

The design of this gimbal is a high-strength galvanized steel with thickness of 1 mm and mounted in it the anti-vibration unit.
When using hangers Wolf the loss of useful area will be not more than 5mm.
Consumption sound-proof hangers Wolf: 3-5 PCs 1m2
Dimensions: length 125 mm, width 42 mm.
Load on mounting – 40 kg.

Other products